Monel R-405 SHEET - UNS N04405 ALLOY Fastener
Monel R405 is the free machining version of Monel 400. It is a nickel-copper alloy with a controlled amount of sulfur added to provide sulfide inclusions that act as chip breakers during machining. Like Monel 400, alloy R-405 is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel R405 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion-resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel steel alloy is particularly resistant to hydrochloric and hydrofluoric acidswhenthey are de-aerated. As would be expected from its high copper content, alloy R-405is rapidly attacked by nitric acid and ammonia systems.
Forms of Monel R-405 Fastener Available at JM-INDUSTRY
| Product name | Standard No. | Size | |
| BOLT | HEX HEAD BOLT | ANSI/ASME B18.2.1, DIN933, DIN931 | 1/4”-4”, M5-M100 |
| SOCKET CAP SCREW | ANSI/ASME B18.3, DIN912, DIN7991, DIN913/916 | 1/4”-4”, M5-M100 | |
| FLANGE BOLT | ANSI/ASME B18.2.3.4M-2001, DIN 6923 | 1/2”-4”, M10-M100 | |
| EYE BOLT | ANSI/ASME, DIN standard | 1/2”-4”, M10-M100 | |
| OTHER BOLT | U BOLT, T BOLT, J BOLT, SQURE HEAD BOLT, SHOULDER BOLT, AND NON-STANDARD BOLT ACCORDING TO CUSTOMER NEEDS. | ||
| STUD | THREADED ROD/BAR | ANSI/ASME, DIN975/DIN976 | 3/8”-4”, M5-M100 |
| DOUBLE ENDS STUDS | ANSI/ASME, DIN STANDARD | 3/8”-4”, M5-M100 | |
| NUT | HEX NUT | ANSI/ASME B18.2.2, DIN934 | 1/4”-4”, M5-M100 |
| HEAVY HEX NUT | ANSI/ASME B18.2.2, DIN standard | 1/2”-4”, M12-M100 | |
| NYLON LOCK NUT | ANSI/ASME B18.16.6-2008, DIN 985,DIN982 | 1/2”-4”, M12-M100 | |
| FLANGE NUT | ANSI/ASME, DIN6923 | 1/2”-4”, M12-M100 | |
| COUPLING NUT/LONG NUT | ANSI/ASME, DIN STANDARD | 1/2”-4”, M12-M100 | |
| SQUARE NUT | ANSI/ASME, DIN 557 | 1/2”-4”, M12-M100 | |
| HEX DOOMD CAP NUT | ANSI/ASME, DIN1587 | 1/2”-4”, M12-M100 | |
| WING NUT | ANSI/ASME, DIN315 | 1/2”-4”, M12-M100 | |
| WASHER | FLAT WASHER | ANSI/ASME B18.22.1, DIN125 | 3/8”-4”, M6-M100 |
| SPRING WASHER | ANSI/ASME B18.21.1, DIN127 | 3/8”-4”, M6-M100 |
Testing before shipping
Step 1: Size Detection
Step 2: GO Gauge and NO-GO Gauge Detection
Step 3: Chemical Composition Detection
Step 4: Mechanical Properties Test
Step 5: The product is carefully packaged
Feed water and steam generator tubing.
Brine heaters, sea water scrubbers in tanker inert gas systems.
Sulfuric acid and hydrofluoric acid alkylation plants.
Pickling bat heating coils.
Heat exchangers in a variety of industries.
Transfer piping from oil refinery crude columns.
Plant for the refining of uranium and isotope separation in the production of nuclear fuel.
Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics.
Monoethanolamine (MEA) reboiling tube.
Cladding for the upper areas of oil refinery crude columns.
Propeller and pump shafts.
Brine heaters, sea water scrubbers in tanker inert gas systems.
Sulfuric acid and hydrofluoric acid alkylation plants.
Pickling bat heating coils.
Heat exchangers in a variety of industries.
Transfer piping from oil refinery crude columns.
Plant for the refining of uranium and isotope separation in the production of nuclear fuel.
Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics.
Monoethanolamine (MEA) reboiling tube.
Cladding for the upper areas of oil refinery crude columns.
Propeller and pump shafts.
The chemical composition of Monel R-405 fasteners is as follows
The mechanical properties of Monel R-405 fasteners are as follows
Related Product
Monel 400 SHEET - UNS N04400 ALLOY Fastener
Nickel Alloy 400/ Monel 400 Bolts and Nuts and Nuts
A nickel-copper alloy, Monel 400 bolts are ...
JM Hardware® Monel K500 Fastener - UNS N05500 Bolt Nut Washer Stud Factory
Nickel Alloy 500/ Monel 500 Bolts and Nuts and Nuts
Monel K500 bolts are comprised of a nickel ...
Special Alloy Fastener
Custom Reviews
