Experienced supplier of UNS N10675 ALLOY Fastener,Hastelloy B-3

Home > Product > Special Alloy Fastener > Hastelloy Alloy > Hastelloy B-3 UNS N10675 ALLOY Fastener

Hastelloy B-3 UNS N10675 ALLOY Fastener

Tel: 0086-21-68413710
E-mail: jminfo@jm-industry.com

Description
Applications
Features

Hastelloy B-3 has a great hydrochloric acid resistance at any concentrations and temperatures. It also resists sulfuric, phosphoric, formic, acetic acids and other nonoxidizing media. It has excellent resistance to pitting corrosion, stress corrosion cracking, and knife line and weld heat-affected zone attack. Hastelloy B3 has greater thermal stability than Hastelloy B2.

Different Countries Steel No. Chart

Model	GB		ASTM	DIN	BS	AFNOR
Model	New grades	Old grades
Hastelloy C-276	NS3304	NS334	UNS N10276	W.Nr.2.4819 / NiMo16Cr15W	NC17D
Hastelloy C-4				2.461
Hastelloy C-22	NS3308		UNS N06022	W.Nr.2.4602
Hastelloy C-2000			UNS N06200	2.4675
Hastelloy C-59			UNS N06059	2.4605
Hastelloy B	NS3201	NS321	UNS N10001
Hastelloy B-2	NS3202	NS322	UNS N10665	2.46		NiMo28
Hastelloy B-3	NS3203		UNS N10675	2.46
Hastelloy X			UNS N06002	2.4665

Forms of Hastelloy B-3 Fastener Available at JM-INDUSTRY

	Product name	Standard No.	Size
BOLT	HEX HEAD BOLT	ANSI/ASME B18.2.1, DIN933, DIN931	1/4”-4”, M5-M100
	SOCKET CAP SCREW	ANSI/ASME B18.3, DIN912, DIN7991, DIN913/916	1/4”-4”, M5-M100
	FLANGE BOLT	ANSI/ASME B18.2.3.4M-2001, DIN 6921	1/2”-4”, M10-M100
	EYE BOLT	ANSI/ASME, DIN standard	1/2”-4”, M10-M100
	OTHER BOLT	U BOLT, T BOLT, J BOLT, SQURE HEAD BOLT, SHOULDER BOLT, AND NON-STANDARD BOLT ACCORDING TO CUSTOMER NEEDS.
STUD	THREADED ROD/BAR	ANSI/ASME, DIN975/DIN976	3/8”-4”, M5-M100
STUD	DOUBLE ENDS STUDS	ANSI/ASME, DIN STANDARD	3/8”-4”, M5-M100
NUT	HEX NUT	ANSI/ASME B18.2.2, DIN934	1/4”-4”, M5-M100
	HEAVY HEX NUT	ANSI/ASME B18.2.2, DIN standard	1/2”-4”, M12-M100
	NYLON LOCK NUT	ANSI/ASME B18.16.6-2008, DIN 985,DIN982	1/2”-4”, M12-M100
	FLANGE NUT	ANSI/ASME, DIN6923	1/2”-4”, M12-M100
	COUPLING NUT/LONG NUT	ANSI/ASME, DIN STANDARD	1/2”-4”, M12-M100
	SQUARE NUT	ANSI/ASME, DIN 557	1/2”-4”, M12-M100
	HEX DOOMD CAP NUT	ANSI/ASME, DIN1587	1/2”-4”, M12-M100
	WING NUT	ANSI/ASME, DIN315	1/2”-4”, M12-M100
WASHER	FLAT WASHER	ANSI/ASME B18.22.1, DIN125	3/8”-4”, M6-M100
WASHER	SPRING WASHER	ANSI/ASME B18.21.1, DIN127	3/8”-4”, M6-M100

Testing before shipping

Step 1: Size Detection

Step 2: GO Gauge and NO-GO Gauge Detection

Step 3: Chemical Composition Detection

Step 4: Mechanical Properties Test

Step 5: The product is carefully packaged

Hastelloy B-3 is suit for the applications where Hastelloy B2 is required. Hastelloy B3 should not be used in the presence of ferric or cupric salts as these salts may cause rapid corrosion attack.

Hastelloy B-3 Chemical composition:

%	Ni	Mo	Ni+Mo	Cr	Fe	W	Co	C	Mn	Si	P	S	Al	Ti	Cu	Nb	Ta	V	Zr
min	65	27	94	1	1
max		32	98	3	3	3	3	0.01	3	0.1	0.03	0.01	0.5	0.2	0.2	0.2	0.2	0.2	0.1

Hastelloy B-3 Physical properties:

Density	9.22 g/cm3
Melting range	1370-1418℃